1. Round type and radiate magnetic poles, suitable for clamping round type and any form of workpiece machining.
2. Workpieces can be touch to all poles of Magnetic Chuck, super power magnetic force as minimum of 1600Kgf(1.6tons) ±5% and maxi ximum of 4400Kgf (4.4 tons)±5%, it depends on size of workpiece and magnetic chuck.

3.Electro-permanent magnetic design,1~10 seconds for power ON & OFF. No need  to keep power supply,without temperature rise which is available for long time use. The accuracy will not be affected by the deformation of the workpiece due to the increase in temperature.

4. Un-obstructed movement of cutters during machining, the really functions of 5 side machining on workholding.
5. Shorten the set up time of the workpieces, the clamping area can cover the entire working area. Improve the processing efficiency by multiple workpieces machining at the same time

KCPM-CIRRA-A Induction Block:

1. Induction Block KCPM-CIRRA-Aseries are use with KCPM-CIRRA chucks, can be increased to more functions on workholding.

2. Convenience and Accuracy,Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.

1.suitable in use for combine with Vertical Lathe, CNC 5 Axis Index Device, CNC 5 Axis Machining Center

2. Minimum dimension of workpiece required as:
KCPM-CIRRA-A300-@ 300mm:

KCPM-CIRRA-A400-@360mm;

KCPM-CIRRA-A500-@500mm
or same dimensions of any other forms of workpiece.

3. More functions for cooperate with induction plate, can do positioning on workholding.